Compact Track Loaders

SVL110-3

Break New Grounds: Make short work of rugged bush, uneven ground, or a challenging job site. The new Kubota SVL110-3 is faster, stronger, and tougher than ever before thanks to increased horsepower and high-performance attachment capability.

Overview

Powerful where it counts the most.

At Kubota, we’re never satisfied. The new Kubota SVL110-3 compact track loader builds on the reliability and strength of the SVL97-3, retaining its size but equipping it with even more power. With 112.7 HP and 45 GPM auxiliary flow and advanced features like Creep Mode, it’s ready to tackle asphalt work, site prep and even forest clearing. Those types of jobs can be difficult, which is why we’ve upped the operator comfort, ease of maintenance, and the strength needed to take advantage of high flow attachments. We put in the work to help you do the same.

Features

Increased performance

Increased performance

It’s not just a new model. The SVL110-3 is equipped with a range of innovative new features that are designed to increase performance while maintaining operator ease and comfort.

High flow auxiliaries with 14 pin connector

High flow auxiliaries with 14 pin connector

Higher flow means more muscle when you need extra hydraulic horsepower for the toughest jobs. Auxiliary hydraulic flow for the SVL110-3 can be programmed up to 45 gpm. The coupler manifold includes both 1/2"" and 3/4"" couplers plus 14 pin connector for attachments that require more than 1 function. Create up to twenty preset flow modes to ensure the optimal flow rate for every job you do in your SVL110-3.

Auxiliary Performance System (APS)

Auxiliary Performance System (APS)

The SVL110-3 is designed to run high flow attachments. APS manages the auxiliary flow and engine power in those tough conditions to keep attachment running efficiently for maximum productivity.

Creep mode

Creep mode

The SVL110-3 is the first Kubota compact track loader with creep mode, which allows operators to adjust their traveling speed from a crawl to top low-range speed with full stroke of joystick, all while maintaining full hydraulic control to do precision work and prevent operator fatigue.

Closed center hydraulics

Closed center hydraulics

What saves time? Doing more at once. The Closed center Hydraulics allow simultaneous performance between loader, bucket cylinders and auxiliary for improved productivity and efficiency.

Sealed cab for quiet comfort

Sealed cab for quiet comfort

Block out the noise and the elements. The cab is completely sealed, preventing operators from inhaling dust and ensuring a comfortable working environment. The sealed cab also reduces outside noise to 79 dBa when inside so you can work longer with minimal fatigue from noise or the elements.

Easy Entry Roll-Up Door

Easy Entry Roll-Up Door

No matter what attachment is on the SVL110-3, operators can easily get in and out of their unit. Enhance operator convenience and efficiency with easy entry and exit.

Premium 7” LCD monitor standard

Premium 7” LCD monitor standard

The SVL110-3’s digital colour LCD touch panel builds on the success of Kubota's Intelligent Control System by providing a wide range of functions to keep you aware of the SVL110-3’s operating status at all times. This panel features touch and jog dial enabled controls for quickly selecting operations and functions, as well as easy-to-read indicators and alerts. The panel is positioned to the front right of the operator for excellent visibility and fast access.

Seamless Bluetooth compatibility

Seamless Bluetooth compatibility

Our new integrated Bluetooth radio allows for seamless Bluetooth streaming and hands-free calling.

LED work lights with delayed auto turn-off

LED work lights with delayed auto turn-off

Illuminate your work site with new LED work lights featuring customizable turn-off delay for enhanced convenience and safety. Operators can program the lights to automatically switch off from 1 to 20 minutes after the engine is shut down. This feature ensures that the operator can safely exit the machine and move away with ample illumination until they are clear of the area.

Air ride seat with heat

Air ride seat with heat

Experience unparalleled comfort with our High Back Air Ride Cloth Heated Seat. Crafted for optimal support and customizable cushioning while wrapped in cloth fabric for durability and toughness. Plus, stay cozy in the cold with integrated heating elements.

Rear view camera standard

Rear view camera standard

Reverse confidently with a factory designed, rear-view camera standard on the SVL110-3. This camera relays a fish-eye view directly to the 7” LCD screen in the cab, so you can be aware of your surroundings while reversing.

Ride control standard

Ride control standard

Cushions heavy loads to minimise operator discomfort and fatigue, maintaining stability and control, and minimising material loss over rough terrain.

Engine auto-idle

Engine auto-idle

When the SVL110-3 detects inactivity, the engine RPM automatically drops to idle. As soon as you engage any control lever, the engine RPM instantly revs back up. This smart feature not only minimizes noise and exhaust emissions but also cuts down on fuel consumption and operating costs. Plus, it can be easily switched on or off as needed.

Track response

Track response

Operators now have the ability to change their travel response sensitivity through the use of the new LCD panel. The SVL110-3 offers you a choice of three track response settings: Mild, Normal, and Quick. Use mild when you are in those slippery conditions to minimize track spin for maximum productivity or select quick when you are in dry conditions for fast reaction time.

Decelerator pedal

Decelerator pedal

The SVL110-3 comes standard with a foot throttle to decrease the engine RPM on demand, allowing operators to turn on a decelerator pedal to control the RPMs. This is especially useful when grading or pushing material.

Auto-Shift

Auto-Shift

The auto-shift system enables automatic travel shift from high to low when turning or going into a pile of material. This increases productivity and makes all operators more efficient.

Radiator easy access swing out design

Radiator easy access swing out design

Facilitates easy access to water/fuel separator, oil, air, and fuel filters, streamlining maintenance tasks and ensuring optimal performance. The swing out radiator requires no tools to access the routine items.

Easy maintenance and cleanouts

Easy maintenance and cleanouts

Save time and effort when doing maintenance: the cab can be tilted 72° without having to lift the arm, allowing easy access to the hydraulic pumps, valves, lines and hydraulic tank. The SVL110-3 has three clean outs on the bottom of the chassis and one on each side to clean out material from the loader arms area.

Maximize productivity with KubotaNOW Telematics

Maximize productivity with KubotaNOW Telematics

KubotaNOW, our advanced telematics solution, seamlessly integrates your Kubota equipment with your everyday tools. Access vital data such as accumulated hours, fuel levels, location tracking, temperatures, maintenance reminders, and more. Receive timely and precise information exactly when you need it. Standard on the SVL110-3 model, KubotaNOW ensures you're always connected to your equipment.

Videos

Overview of the ALL-NEW SVL110-3

Models

SVL110-3

SVL110-3

Engine Horsepower: 112.7 HP
Rated Operating Capacity - 35% Tipping Load: 3,700 lbs
Bucket Breakout Force: 7,650 lbf
Operator Platform: Cab
Details Get A Quote

Downloads

Brochures

Terms & Conditions

Rebate of $9,300.00 available on cash purchases of a new SVL110-3 only. Offer valid until 09-30-2026.

*Dealer may sell for less. Dealer order/trade may be necessary. Prices, payments and models featured throughout may vary by dealer. Some restrictions apply. See your dealer for complete details. Offers valid only at participating dealers in Canada and are subject to change, cancellation or extension at any time without notice or obligation. For all offers: taxes, applicable fees (including, but not limited to, governmental environmental fees, administration fees, set-up fees, dealer fees, and delivery fees), insurance and registration are extra. Freight is included. Dealer order/trade may be necessary. Minimum down payment of 10% required for financing offers on turf and agricultural product. Minimum 25% down payment is required for all construction equipment. Specifications, features, illustrations and equipment shown online are based on the latest available information at the time of publication. Although descriptions are believed to be correct, accuracy cannot be guaranteed. We reserve the right to make changes at any time, without notice or obligation, specifications, accessories, materials, models, prices, payments and other information.

Contact Us

  • Kensington Agricultural Services