Disc Mowers

DM3000 Series

Kubota's DM3000 Series center-suspended disc mowers offers an ideal combination of low weight and large working width. This model is made for convenience, requiring a tractor with a minimum of 140.0 HP for an efficient pull, and designed with a vertical transport solution for narrow transport.

false

Features

Outstanding Suspension

Outstanding Suspension

The DM3000 Series centre suspension system ensures optimal tracking and precise ground contour following.

Non-Stop BreakAway Protection

Non-Stop BreakAway Protection

If hitting an obstacle the Non-Stop BreakAway system will be activated and swing the machine backwards and over the obstacle and then return it to the original working position. No need to stop – no time lost.

Three-Bladed Discs

Three-Bladed Discs

With three blades per disc, Kubota mowers provide a 50% higher cutting frequency compared to conventional solutions. This means a third less load per blade, an even load on the drive, smoother power usage, and produces a neat, cleanly cut stubble.

Fully Welded Cutterbar

Fully Welded Cutterbar

The Kubota cutterbar’s high cooling and lubrication efficiency oil pump system reduces wear and tear. The fully welded cutterbar with overlapping C-channels makes for a very strong design requiring low maintenance with no risk of loose bolts.

Vertical Transport Position

Vertical Transport Position

When in transport, the mowers are folded to a vertical position behind the tractor. The centre of gravity is close to the tractor, which ensures excellent weight distribution and transport stability.

Easily Adjust Ground Pressure

Easily Adjust Ground Pressure

This feature provides easy and simple setting of ground pressure on the Kubota DM3000 series. For greater operator comfort ground pressure of the large suspension spring is set hydraulically from the tractor cab. Easy to adjust, even on the go.

Hydraulic Lifting on Headlands

Hydraulic Lifting on Headlands

Lifting on headlands via hydraulic cylinder provide ample ground clearance.

Centre Suspension

Centre Suspension

The DM3000 series is centre suspended to give an even weight distribution across the complete mower width. Faster and more precise adaptation to ground contours is also achieved because of the centre suspended design. The benefit is less skid wear and optimum protection of the stubble.

Models

DM3032

DM3032

Type: Rear-Mounted
Horsepower (min.): 55.0 HP
PTO: 540/1,000 rpm
Cutting Width: 10'6" (3.2m)
DM3036

DM3036

Type: Rear-Mounted
Horsepower (min.): 60.0 HP
PTO: 540/1,000 rpm
Cutting Width: 11'6" (3.5m)
DM3040

DM3040

Type: Rear-Mounted
Horsepower (min.): 70.0 HP
PTO: 540/1,000 rpm
Cutting Width: 13'1" (4.0m)
DM3087

DM3087

Type: Mounted-Butterfly
Horsepower (min.): 140.0 HP
PTO: 1,000 rpm
Cutting Width: 28'7" (8.7m)
DM3095

DM3095

Type: Mounted-Butterfly
Horsepower (min.): 150.0 HP
PTO: 1,000 rpm
Cutting Width: 31'2" (9.5m)

Terms & Conditions

Representative finance example for the DM3032: $27,685.30 financed at 0% (2.64% effective APR which factors in $1,320.21 in non stackable cash that cannot be combined with finance offers) equals $528.93 monthly for 48 months. $2,820.97 down payment required. Cost of borrowing is $1,320.21 for a total obligation of $27,685.30. Financing available on approved credit. Prices and payments include freight and other applicable fees (including environmental fees, administration fees, set-up fees, and dealer fees on the model specified). Offer valid until 03-31-2026.

*Dealer may sell for less. Dealer order/trade may be necessary. Prices, payments and models featured throughout may vary by dealer. Some restrictions apply. See your dealer for complete details. Offers valid only at participating dealers in Canada and are subject to change, cancellation or extension at any time without notice or obligation. For all offers: taxes, applicable fees (including, but not limited to, governmental environmental fees, administration fees, set-up fees, dealer fees, and delivery fees), insurance and registration are extra. Freight is included. Dealer order/trade may be necessary. Minimum down payment of 10% required for financing offers on turf and agricultural product. Minimum 25% down payment is required for all construction equipment. Specifications, features, illustrations and equipment shown online are based on the latest available information at the time of publication. Although descriptions are believed to be correct, accuracy cannot be guaranteed. We reserve the right to make changes at any time, without notice or obligation, specifications, accessories, materials, models, prices, payments and other information.

Contact Us

  • Kensington Agricultural Services