Disc Mowers

DM2000 Series

Kubota's DM2000 Series disc mowers features a 7'10"-10'6" working widths, Kubota's exclusive Non-Stop BreakAway System for cutterbar protection, and large 35° working angle.

false

Features

Three-bladed Discs

Three-bladed Discs

With three blades per disc, Kubota mowers provide a 50% higher cutting frequency compared to conventional solutions. This means a third less load per blade, an even load on the drive, smoother power usage, and produces a neat, cleanly cut stubble.

Fully Welded Cutterbar

Fully Welded Cutterbar

The Kubota cutterbar’s high cooling and lubrication efficiency oil pump system reduces wear and tear. The fully welded cutterbar with overlapping C-channels makes for a very strong design requiring low maintenance with no risk of loose bolts.

Counter-Rotating Discs

Counter-Rotating Discs

All Kubota mowers have an even number of counter-rotating discs. Apart from the immediate crop transport to the rear this system ensures that even in wet conditions no stripes of uncut forage are left in the field.

Low Noise Cutterbar

Low Noise Cutterbar

The Kubota cutterbar is designed for low maintenance and offers virtually quiet operation - Convenient during a long and busy work day.

Vertical Transport Position

Vertical Transport Position

When in transport, the mowers are folded to a vertical position well behind the tractor. The center of gravity is close to the tractor, which ensures excellent weight distribution and transport stability.

Non-Stop BreakAway Protection

Non-Stop BreakAway Protection

If hitting an obstacle the Non-Stop BreakAway system will be activated and swing the machine backwards and over the obstacle and then return it to the original working position. No need to stop – no time lost.

Fast Lifting on Headland

Fast Lifting on Headland

The mower is easily lifted via a hydraulic cylinder without activating the tractor’s 3pt linkage. The advantage is less wear on tractor and machine, as the PTO stays in the same position, minimizing vibrations in the transmission.

35° Working Angle

35° Working Angle

The DM2000 can pivot 35° up and down by simply operating the tractor hydraulics to ensure efficient ground contour.

Models

DM2024

DM2024

Type: Rear-Mounted
Horsepower (min.): 46.0 HP
PTO: 540 rpm
Cutting Width: 7'10" (2.4m)
DM2028

DM2028

Type: Rear-Mounted
Horsepower (min.): 50.0 HP
PTO: 540 rpm
Cutting Width: 9'2" (2.8m)
DM2032

DM2032

Type: Rear-Mounted
Horsepower (min.): 55.0 HP
PTO: 540 rpm
Cutting Width: 10'6" (3.2m)

Terms & Conditions

Representative finance example for the DM2024: $18,978.21 financed at 0% (2.64% effective APR which factors in $956.84 in non stackable cash that cannot be combined with finance offers) equals $383.35 monthly for 48 months. $2,044.53 down payment required. Cost of borrowing is $956.84 for a total obligation of $18,978.21. Financing available on approved credit. Prices and payments include freight and other applicable fees (including environmental fees, administration fees, set-up fees, and dealer fees on the model specified). Offer valid until 03-31-2026.

*Dealer may sell for less. Dealer order/trade may be necessary. Prices, payments and models featured throughout may vary by dealer. Some restrictions apply. See your dealer for complete details. Offers valid only at participating dealers in Canada and are subject to change, cancellation or extension at any time without notice or obligation. For all offers: taxes, applicable fees (including, but not limited to, governmental environmental fees, administration fees, set-up fees, dealer fees, and delivery fees), insurance and registration are extra. Freight is included. Dealer order/trade may be necessary. Minimum down payment of 10% required for financing offers on turf and agricultural product. Minimum 25% down payment is required for all construction equipment. Specifications, features, illustrations and equipment shown online are based on the latest available information at the time of publication. Although descriptions are believed to be correct, accuracy cannot be guaranteed. We reserve the right to make changes at any time, without notice or obligation, specifications, accessories, materials, models, prices, payments and other information.

Contact Us

  • Kensington Agricultural Services