2023 Schulte GX-150 Base
- Year 2023
 - Make Schulte
 - Model GX-150
 
2023 Schulte GX-150
Features may include:
- Our general duty 15 foot flex wing rotary mower.
 
- A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris
 
- An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm and the 1000 rpm is a category 5. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance
 
- Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
 
- A four-gearbox drive line with independent slip clutches
 
- Deck protection rings are standard and protect the cutter deck from rising blades
 
- Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors.
 
- High flex wing working range of 25° down to 90° up
 
- Solid laminated tires 20” or 26” or forklift tires available
 
- 4, 6 or 8 tire options
 
- Heavy duty 3/4” thick blade disc with 4” blades and pentagon blade bolts
 
- Safety light kit
 
- Pro Level hitch
 
- 540 or 1000 RPM Drive package
 
- Single chains front and rear
 
- Gearbox sight glass
 
- Heavy duty cast hinge line with wiper seals
 
- Deck protection rings are standard
 
Engine
							Minimum Engine Power
							50hp (37kw)
						
						Drivetrain
							Gearbox
							Divider Gearbox Rating: 260hp (194kw) | Center & Wing Gearbox Rating: 210hp (155kw)
						
						Operational
							Operating Conditions
							Blade Tip Speed Wing 1000rpm: 15,708 ft/min (4788m/min) | Blade Tip Speed Center 1000rpm: 16,390 ft/min (4996m/min) | Blade Tip Speed Wing 540rpm: 15,459 ft/min (4711m/min) | Blade Tip Speed Center 540rpm: 16,286 ft/min (4964m/min)
						
						Chassis
							Hitch/Type
							540 CV: Cat 6 | 1000 CV: Cat 5 | Wing Drive Shafts: Cat 5
						
						Dimensions
							Cutting Width
							15’ (4.57m)
						
						
							Overall Width
							15.8’ (4.83m)
						
						
							Overall Length
							16.8’ (5.13m)
						
						
							Height
							Cutting: 1.75”-16.75” (45mm-425mm)
						
						
							Transport Width
							93” (2.36m)
						
						
							Transport Height
							84” (2.13m)
						
						
							Dimensions
							Wing Floating Range: 25° down to 30° up | Wing Working Range: 25° down to 90° up | Cutting Capacity: 3.5” (89mm) | Blade Overlap: 6.5” (165mm) | Side Skirt Depth & Thickness: 13.6” (346mm) 1/4” (6.4mm)
						
						
							Depth, Maximum
							thickness: .135” (10ga or 3.4mm)
						
						Capacities
							Hitch Weight Capacity
							1,702lbs (772kg)
						
					
			
