2025 Kuhn RC 200 Series 260 Trailer
- Year 2025
- Make Kuhn
- Model RC 200 Series
2025 Kuhn RC 200 Series 260 Trailer
Outperform ExpectationsKUHN Knight RC 200 Series Reel Commercial mixers provide the ultimate versatility, durability and performance. Four models are available in trailer, truck or stationary configurations, and offer capacities ranging from 500 to 950 ft³.
KUHN Knight RC 200 Series Reel Commercial mixers provide superior durability and performance with innovative options that separate them from the competition. For dairy and beef producers mixing rations with high percentages of roughages or distillers grains, this design gives them the ability to efficiently handle a wide range of materials.
Features may include:
Superior Feed Movement- The reel thoroughly mixes rations gently without causing excessive damage to the feed ingredients, preserving precious nutritional value for your herd. The large reel gently lifts material up into the side augers for excellent side-to-side movement. The upper auger moves material rearward, while the lower auger moves material forward for end-to-end mixing. This helps feed continually charge the door during discharge.
- Quality performance, with the lowest possible input costs is the goal of every operation. The fast, gentle mixing of KUHN Knight reel mixers helps maximize efficiency and minimize expense. The reel and auger design eliminates much of the force and pressure seen with other mixer types, resulting in low horsepower requirements and, correspondingly, less fuel consumption for economical operation.
- KUHN Knight reel mixers provide a consistent mix, even with small batches, for a balanced ration from beginning to end. Their quick, even discharge with a more complete cleanout helps save time and maximizes efficiency.
- With a high discharge point, these mixers allow for the use of a simple slide tray in most feeding situations. The long tray makes it easy to feed deeper into most bunks while preventing feed loss from the wind. This dependable, low-cost option also results in less maintenance.
- The Helix reel has a robust build and has been thoroughly tested to withstand the most challenging conditions. The design of the reel crossbars evens the pressure across the length of the reel for smoother operation. It also engages with the feed more smoothly.
- The open-center design eliminates obstructions in the reel and provides superior feed movement and unparalleled mixing action. The benefits are unmistakable, with faster, more consistent mixing, improved load leveling, optimized mixer space utilization and fewer dead spots for the ultimate in ration quality.
- A mix bar runs diagonally across the center of the reel to help ensure consistent feed movement throughout the entire mixing chamber. The reel crossbars keep feed moving efficiently around the outside of the chamber. The secondary mechanical mixing action from the mix bar provides a fast and thorough mix even in wet, heavy rations with large amounts of distillers grains.
PTO
							PTO Power, Rated Engine Speed
							540 or 1,000 rpm | Minimum Power Requirement: 110 hp (82 kW)
						
						Operational
							Operating Speed
							Reel: 5.6 - 6.8 rpm
						
						Chassis
							Hitch/Type
							Adjustable Clevis
						
						Dimensions
							Dimensions
							Drop-Side Reduction: 12" (30 cm) | Lower Auger Flighting Diameter: 24" (61 cm) | Lower Auger Tube - Outside Diameter: 6 5/8" (17 cm) | Lower Auger Drive Shaft Diameter: 3 1/2" (8.9 cm) | Upper Auger Flighting Diameter: 22" (56 cm) | Upper Auger Tube - Outside Diameter: 6 5/8" (17 cm) | Upper Auger Drive Shaft Diameter: 3 1/2" (8.9 cm) | Reel Diameter: 70" (178 cm) | Reel Driveshaft Diameter: 5" (13 cm) | Lower Auger Tube - Wall Thickness: 7/16" (1.1 cm) | Upper Auger Tube - Wall Thickness: 7/16" (1.1 cm) | Door Opening Size: 42" x 22" (107 x 56 cm) | Sidewall Thickness: 7 GA / 1/4" (0.5 / 0.6 cm) | End Panel Thickness - Front and Rear: 1/4" (0.6 cm) | Rear Hopper Thickness: 3/8" (1 cm) | Auger Hopper Thickness: 3/8" (1 cm) | Slide Tray - Maximum Reach: 22" (56 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Reach to Tip-Off Pivot: 38"/44"/52" (97/112/132 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off Pivot: 30"/37"/44" (76/94/112 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off End: 50"/49"/64" (127/124/163 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Reach to Tip-Off Pivot: 57"/57"/71" (145/145/180 cm) | Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm) - Maximum Reach: 53"/60"/67"/81" (135/152/170/206 cm)
						
						
							Flighting Thickness
							Lower Auger - Sectional: 5/8" (1.6 cm) | Upper Auger: 1/2" (1.3 cm)
						
						
							Height
							Discharge Hinge: 47" (119 cm) | Slide Tray - Maximum: 35" (89 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Height at Tip-Off Pivot: 53"/57"/63" (135/145/160 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle at Tip-Off End: 39"/44"/48" (99/112/122 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle at Tip-Off Pivot: 53"/57"/63" (135/145/160 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle at Tip-Off End: 39"/44"/48" (99/112/122 cm) | Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm): 30"/40"/49"/69" (76/102/124/175 cm)
						
						
							Length
							Mixing Chamber: 198" (503 m) | Haypan: 144" (366 cm)
						
						
							Overall Height
							107" (272 cm) | Haypan Up: 22" (56 cm) | Haypan Down: 8" (20 cm)
						
						
							Overall Width
							Mixer Only (No Discharge): 102" (259 cm)
						
						
							Overall Length
							272" (691 cm)
						
						
							Spindle Diameter
							Single Axle: 4 1/2" (11 cm) | Tandem Axle: 3 3/8" (9 cm)
						
						
							Transport Width
							Slide Tray: 114" (290 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle: 112"/116"/117" (284/295/297 cm) | 4-Auger Discharge - 28"/36"/45" (71/91/114 cm) -  Tandem Axle: 120"/124"/124" (305/315/315 cm) | Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm): 120"/122"/123"/125" (305/310/312/318 cm)
						
						Capacities
							Width
							Tread: 101" (257 cm)
						
						
							Load Capacity, Land
							Maximum Net: 18,000 lbs (8,165 kg)
						
						
							Volume
							600 ft³ (17 m³)
						
						Weights
							Weight
							Unit: 17,200 lbs (7,802 kg)
						
						Features
							Chain Type
							Roller Chain Drive: 80-100-120-140 | Roller Chain Drive - Heavy Duty: 100-120-140-140
						
						
							Construction Material
							Stainless Steel Side Liner: 7/64" (0.3 cm)
						
						
							Features
							Reel Arms: 5 | Replaceable Sickle Knives on Upper Auger | Self-Sharpening Knives in Lower Auger Notches | Axle Configuration: Single or Tandem Axle | Tongue Weight - % Gross: 11% | Weighing System: 4-point | Oil Bath Location: Rear
						
						
							Hub Type
							HD 10-bolt
						
					 
			

 
							