Kensington Agricultural Services Ltd

Information

2026 Kubota Kverneland PW 8PW-115

Efficient, flexible, easy to operate The well proven Kverneland PW “3 in 1 concept" consists of a robust semi-mounted plough in the front and a standard EG mounted reversible plough at the rear. Depending on weather and soil conditions, either use the whole wagon plough or only the front or the rear plough. Likewise if 2 fields need to be ploughed simultaneously, the front and the rear ploughs can work in each field.

• Robust design + Kverneland unique steels and heat treatment technology for an exceptional long lasting of the plough

• Even in hilly conditions a quality ploughing is guaranteed. The 3 point linkage of the center section ensures that the PW/RW follows the ground at all times.

• Easy and safe to adjust and to operate (ATS, Isobus, manual management with the addition of a valve controller or manual management via tractor control)

• FURROWcontrol for easy straight furrows is available for the Isobus PW and RW ploughs versions

• Unrivalled Auto-reset system for PW for non-stop ploughing. No maintenance. Shearbolt protection for RW

• Variomat Vari-width® for "On the Move" or manual furrow width adjustments

• In Furrow and/or "On Land"

• Stable and safe while turning and in transport

• Packomat compatible

• Wide range of accessories

• 7 to 12 furrows

Features may include:

The Kverneland PW semi-mounted ploughs consist of a robust central wheel wagon plough at the front and a mounted reversible plough at the rear. The latter can be either a standard Kverneland mounted reversible EG or ED.

This unique design gives you the flexibility to choose the right combination of ploughs to suit any soil conditions: either the whole wagon plough or only the front or the rear plough: “3 ploughs in 1”. In some situations, it may be advantageous to use only the front part in very wet or very hard conditions, or due to the availability of a tractor. The heavy front section alone will provide optimum performance in any conditions. Likewise, you can use the rear mounted reversible plough for ploughing smaller areas or headlands.

The rear plough can be uncoupled within a few minutes and be ready for use. Likewise, it only takes a short time to join them together. At any time, you have the freedom to choose.

The wagon plough follows the ground undulations in a smooth way thanks to the centre section consisting of a 3 point linkage system. It therefore behaves like a normal mounted plough.

The perfect seedbed is made while ploughing. The Packomat® is an integrated soil packer which is directly coupled to the plough. This combination is both efficient and environmentally friendly. By applying a pressure of 1.000 kg, the wedge-shaped discs cut their way through the furrows, crush clods, push down stones, level and pack the soil. This ensures a quick re-establishment of the capillarity water conductivity

The plough is available with either manual adjustable working width or with the famous Kverneland Variomat® system, allowing “On the Move” furrow width adjustments from the tractor seat. The ploughing width can be adjusted from 35 to 50 cm (14-20”). The output is then increased up to 30%.

Kverneland engineering skills have made it possible to construct a plough capable to withstand the high stresses on such a large reversible plough, particularly when ploughing at depth and at speed. Not least, the plough remains easy to operate. The Kverneland PW features the renowned Auto-reset system.