Kensington Agricultural Services Ltd

Information

2022 Greentec Multi Carrier HXF 3302

The Multi Carrier HXF 3302 is the largest model in the HXF series and is mainly mounted on telehandlers, large front end loaders and backhoes.

A wide variety of tools for hedge trimming and shelterbelt maintenance can be attached to the Multi Carrier HXF 3302 frame:

The Quadsaw LRS 2002 and LRS 2402 are the ideal solution for windbreak maintenance where large branches need to be cut (maximum 21 cm (8.28") thickness). The quadsaws provide a smooth cut and have a high working speed. However, the noise level is loud and there are some maintenance costs regarding the sawblades.

The Cutterbax HX 170 - 270 series can also be used for windbreak maintenance. The cutterbars have a lower noise level and do not require any maintenance. However, they have a lower capacity and can only cut relatively small branches (maximum 11 cm (4.33") thickness).

The Rotary Hedge Cutter RC 162 is designed for hedge cutting and performs three operations in one. It cuts, shreds and disposes the cut-off material, so you do not have to pick it up afterwards. The Rotary Hedge Cutter RC 162 is best suited for regularly hedge cutting where the branches are no more than 4 cm (1.57") thick.

All the tools are attached to the Multi Carrier HXF 3302 frame which is mounted on the vehicle. The HXF 3302 is mounted on the carrier vehicle's quick-hitch system whereafter all the hydraulic hoses are connected. The mounting of the machine only requires a few minutes of your time.

When the HXF 3302 is mounted on a telehandler, it can advantageously be a left hand version. Thus, the driver has a perfect view to the attachment tool.

Features may include:

• Mounted on front end loaders, telehandlers, wheel loaders and excavators

• High road safety

• Automatic Hydraulic Break-back (AHS)

• Build in-anti-cavitation valve

• Easy attachment system

• Low weight