Kensington Agricultural Services Ltd

  • PO Box 307, 15 Park Rd.
  • Kensington, PEI C0B 1M0
  • Call Us: (902) 836-3212
  • https://www.kensingtonag.com/
Print This Page

2021 Brillion 4620-24 Folding Seeder SS-24

Information

2021 Brillion 4620-24 Folding Seeder SS-24

Brillion has once again stepped up to the challenge to provide a seeder that increases efficiency while still keeping one thing constant…the proven Sure Stand seeding concept. The 4620-24 Folding Seeder seeds 24’ of alfalfa or grass in each pass across the field. Large seed boxes eliminate operator down time; more time is spent getting the seed in the ground at precisely the right depth for optimum germination.

Seed 24 Feet in Every Pass

Brillion Sure Stand Seeders have set the bar for exceptional grass and alfalfa seeding for well over fifty years and now the tried and true concept has expanded to seed 24 feet in one pass. The 4620-24 Folding Seeder was designed with versatility in mind and helps fill a gap in the Brillion Seeder line-up. The 24’ working width is geared towards producers with mid-size row crop tractors who are looking for more seeding capacity than that of the 12’ Brillion Seeder but yet do not have the horsepower to pull the large 36’ model.

Large Seed Box Capacity

The large 15-bushel capacity seedbox on each seeder section on the 4620-24 model features the proven Micro-Meter seed metering system. The larger seedbox capacity allows the operator to spend more time seeding and less time stopping to fill the seedboxes. This increase in efficiency is a great benefit when there is a short timeframe in ideal seeding conditions.

Precise Seed Placement Equals Optimum Germination

All Brillion Sure-Stand Seeders have the ability to plant a variety of seeds and precisely place the seeds at the correct depth to ensure optimum germination. 4620-24 features large Pulverizer rollers to fine-tune the seedbed and break-up any soil clumps and then gently squeeze soil around the seeds for the ultimate in seed to soil contact and consistent seed placement. The 4620-24 seeder wings float 5 degrees left to right and 5 degrees front to rear on torsion springs to follow the ground’s contours and further enhance germination rates.

Fully Equipped

The 4620-24 Folding Seeder is ground driven and is equipped with an electric clutch on each seeder section. A coil tine track remover, electronic acre meter, LED safety warning lights and powder coat paint are all standard equipment. Each seeder wing on 4620-24 folds forward for transport keeping the transport width under 14’.

The built-in versatility and added-in efficiency along with the durability all Brillion products are known for, the 4620-24 Folding Seeder is an ideal fit for many agricultural applications…that’s the Landoll way!

Features may include:

  • Transport Width is Under 14’; Seeders Fold Forward
  • Entire Frame Weight is Carried and Distributed on (4) Pulverizer Rollers with 1 ¾” Bearings
  • Pulverizer Wheels are 15 ¾” Cast Iron on Front and Rear Rollers
  • Seeder Wings Follow Soil Contours and are able to Float 5 Degrees Left to Right and 5 Degrees Front to Rear on Torsion Springs
  • Micro-Meter Seed Box with Meters Spaced at 6”, Capacity of 15 Bushels per Wing
  • Ground Driven with an Electric Clutch on Each Wing
  • All Pivot Points Utilize Maintenance-Free Polymer Bearings
  • Semi-Mounted Two-Point Hitch is Cat. II, III Free Link, and Cat. II, IIIN, III Quick Coupler
  • (4) 12.5L x 15 FI Transport Tires
  • Coil Tine Track Remover is Standard Equipment
  • LED Warning Lights and SMV Emblem
  • Powder Coat Paint

Photos

Highlights

  • Kensington,
  • 2021
  • Brillion
  • 4620-24 Folding Seeder SS-24
  • Available

Specifications

  • 2021
  • Brillion
  • 4620-24 Folding Seeder
  • SS-24
  • Seed Drill
  • Minimum of 150 HP (111.8 kW)
  • (4) 12.5L x 15 FI
  • 4.5 to 6.0 MPH (7.2 to 9.7 km/h) Dependent on Conditions
  • Semi-Mounted Two-Point Hitch | Category: Cat. II & III Free Link; Cat. II, IIIN, III Quick Coupler
  • 24 ft. (7.3 m)
  • 13 ft. 9 in. (4.2 m)
  • (Transport): 31 ft. 2 in. (9.5 m)
  • Pulverizer Bearings: 1.75 in. (45 mm) Flange Bearing | Rear: 15.75 in. (400 mm) Diameter | Front: 15.75 in. (400 mm) Diameter
  • Seed: 15 Bushels (528.6 l) Each Wing
  • 7,500 lbs. (3,402 kg)
  • Approximate (Empty): 16,178 lbs. (7,338 kg)
  • Pivot Points: Utilize Maintenance Free Polymer Bearings | Seeder Wings: Float 5 Degrees Left to Right and 5 Degrees Front to Rear on Torsion Springs | Pulverizer Rollers: Cast Iron with Notched Profile | Hydraulic Circuits Required: 3
  • Drive: Ground Driven with Independent Electric Seeder Clutches | Micro-Meters with 6 in. (152 mm) Spacing
  • All Steel Construction